Specification

FAQ

Q: What are the working dimensions of the 6060 four-axis engraving machine? A: The working area of the 6060 four-axis engraving machine is usually 600mm×600mm in the X and Y axes. – Q: What is the maximum spindle speed of this engraving machine? A: The maximum spindle speed of the 6060 four-axis engraving machine is generally [specific speed] RPM. – Q: How to set the origin of the coordinate system? A: Usually, you can use the zero-setting button on the control panel to set the origin of the X, Y, and Z axes according to the actual position of the tool and the workpiece. – Q: Can I use different types of tools with this engraving machine? A: Yes, the 6060 four-axis engraving machine can generally use a variety of tools, such as end mills, ball nose cutters, etc., depending on the material and processing requirements. – Q: How often should I clean the engraving machine? A: It is recommended to clean the engraving machine after each use or at least once a week to remove dust and debris. – Q: What should I do to maintain the spindle? A: Regularly check the spindle’s cooling system, keep the spindle lubricated, and avoid overloading during operation. – Q: What should I do if the engraving machine makes abnormal noises? A: First, check if there is any foreign object stuck in the moving parts. Then, check the lubrication and tightness of the mechanical components. If the problem persists, it may be a problem with the motor or spindle, and it is recommended to contact a professional for repair. – Q: Why is the engraving accuracy not high? A: There could be several reasons. Check if the tool is worn out, if the workpiece is fixed firmly, and if the machine’s calibration is correct. Also, check the mechanical transmission parts for any looseness.